ReverseEngineering

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

==== Prerequisites ====

1. IDA Pro 6.0 and above
2. installed qemu-0.14 and above

==== Preparations ====

1. Open your all bios.rom image on IDA Pro.

2 Run relocate script

3. Place bios.rom, vgacirrus-bios.bin (from qemu site), bios_name.idb, linux.img in the current folder

4. Start qemu in debugging mode "qemu -s -S -L . -m 256 -hda linux.img
-localtime -M pc -nographic"

(-s enables GDB stub and -S instructs
QEMU to stop at the system start)

also you  can :

-parallel /dev/parportN (this map virtual qemu parport to your phisical parallel port)

-serial pipe:filename (redirect serial output to the filename as pipe)

play with -acpitable , -smbios, -option-rom, -usbdevice, -device options... (see man qemu)


QEMU will stop and wait for the debugger.

5. In IDA Pro Debugger->Switch debugger choose Remote GDB debugger

Then open debugger options dialog

ReverseEngineering

User Tools

Site Tools

Page Tools